Connecting The Interface Cable; Connecting The Power Cord - Kyocera ECOSYS M6026cdn Service Manual

Connecting the interface cable

1. Connect the interface cable to the
machine and PC or network.

Connecting the power cord

1. Remove the power cord cover.
2. Connect the power cord to the machine
and the wall outlet.
3. Refit the power cord cover.
4. Press the main power switch to turn
power on.
5. Installing the printer driver (refer to
operation guide).
Completion of the machine installation
Figure 1-2-18
Power cord cover
Figure 1-2-19
1-2-11
2PV/2PW
USB interface
Network interface
Power
source cord