Table of Contents
Advertisement
To clean the print head
Clean the print head using the cleaning tool located inside the label
compartment lid. If you do not have a cleaning tool, contact DYMO
Customer Care (http://support.dymo.com).
Troubleshooting
Review the following possible solutions if you encounter a problem
while using your labelmaker.
Problem/Error Message
No display
Poor Print Quality
Poor Cutter Performance
Printing
Too many characters
Exceeded maximum number of
characters in buffer.
Battery low
Batteries almost discharged.
Solution
• Ensure the labelmaker is turned on.
• Replace discharged batteries.
• Replace discharged batteries.
• Ensure label cassette is installed properly.
• Clean the print head.
• Replace the label cassette.
Clean the cutter blade. See Caring for Your
Labelmaker
.
No action required.
Message disappears when printing is finished.
Delete some or all of the buffer text.
Replace batteries.
19
Advertisement
Table of Contents
