Table of Contents
Advertisement
To add a host filter entry, first select the host to be include/exclude from Host
WWN list.
Adjust Range Mask, Filter Type, Access Mode fields. Choose "Add" operation,
then Confirm/Submit to complete the add operation. The added host filter entry
will be shown in the upper half of the Config Frame. Up to 8 host filter entries can
be added.
To delete a host filter entry from the list, select the radio button in front of the host
entry.
Choose "Delete" operation, then Confirm/Submit to complete the delete operation.
Range Mark
Some times it is convenient to combine some corelated WWNs into one ID range
as a single filter entry. This ID range is obtained by "AND'ing" the host WWN and
the Range Mask (which are both 64-bit entities). For example, if hosts
0x210000e0_8b03dc84 and 0x210000e0_8b03dc85 have the same access control,
3-51
Configuring
Advertisement
Table of Contents
