Initiating A Manual System Dump - Extreme Networks BlackDiamond 6804 Troubleshooting Manual

where:
all
critical
• To turn off the system dump action in the system-recovery-level process, use the following
command:
unconfigure system-dump
• To display the configured values for the
use the following command:
show system-dump
When neither the server IP address nor the timeout parameter has been configured, the
show system-dump
Server ip : none
Dump timeout : none
When both the server IP address and the timeout parameter have been configured, the
show system-dump
Server ip : 10.5.2.82 (ok)
Dump timeout : 300 seconds
When the configured server IP address is unreachable, the
looks similar to this example:
Server ip : 10.45.209.100 - currently unreachable via "Mgmt" vlan
dump timeout : none

Initiating a Manual System Dump

To initiate a manual system dump to a remote TFTP dump server, identified by its IP address, use the
following command:
upload system-dump [<ip address>]
If you do not specify an IP address, the system attempts to use the IP address specified in the
configure system-dump server
Advanced System Diagnostics and Troubleshooting Guide
If any task exception occurs, ExtremeWare logs an error in the system log and
automatically initiates a memory dump transfer to a remote TFTP dump server,
followed by one of the following completion actions: msm-failover, reboot,
shutdown, or maintenance-mode. These completion actions are described in
"Configuring System Recovery Actions" on page 40.
If a critical task exception occurs, ExtremeWare logs an error in the system log and
automatically initiates a memory dump transfer to a remote TFTP dump server,
followed by one of the following completion actions: msm-failover, reboot,
shutdown, or maintenance-mode. These completion actions are described in
"Configuring System Recovery Actions" on page 40.
system-dump server
command display looks like this:
command display looks similar to this example:
command.
Dumping the System Memory
and
system-dump timeout
command display
show system-dump
settings,
45