Table of Contents
Advertisement
I.AUTO:
Note: LINELOCK is only effective while the camera is connected to AC power.
II.OFF:
Set the LINELOCK function off.
6. CAMERA ID
600 SERIES MAIN MENU
>CAMERA ID
6.1 CAMERA ID: The camera ID can be turned "ON" to be displayed on the screen, or "OFF".
The default camera ID is "OFF".
When "ON" is selected, user can set the Camera ID up to 12 characteres. Use the
cursor button
press the SET button to choose the character. Use the cursor button
the next character for setting.
Once the characters of camera ID are all selected, press the SET button for 1 sec
to close the menu and the Camera ID will show on the screen as the figure below.
Ex: CAMERA ID EverFocus101
Set as AUTO LINELOCK mode, it will auto sense the line signal to decision whether running
LINELOCK function or not. Also, user can into the adjustment manual of V PHASE. Use
button
or
to select the V PHASE from 0~624. The larger the V Phase parameter,
the more delay time the LINELOCK.
< OFF>
<ON..>
or
to locate characters (characters will show up in the order ),
ID SETUP
> CAMERA ID _________
ID POSITION
UP-LEFT
ID COLOR
WHITE
ID BACKGROUND NONE
PREVIOUS PAGE
12
MENU
to move to
Advertisement
Table of Contents
