S A V E / R E S T O R - EverFocus WDII EQ600 Instruction Manual

7.2 SAVE/RESTORE
ADVANCED SET UP
> LENS
WHITE BAL
VIEWING..
> SAVE/RESTORE...
PREVIOUS PAGE
I. REST0RE USER SETTINGS
Restore the previous user settings from memory. Press SET button to restore user setting.
II. SAVE USER SETTINGS
Save USER SETTINGS into the camera memory. Press SET button to save user setting.
III. RESTORE FACTORY SETTINGS
Restore the default setting. Press SET button to restore factory setting. Please refer to the Appendix-B
for the default factory settings.
IV. RESET CAMERA
Restart the camera again. Press SET button to reset camera.
VI.MENU REV.1.5.5
Display the software version.
SAVE/RESTORE
> RESTORE USER SETTINGS..
SAVE USER SETTINGS..
RESTORE FACTORY SETTINGS..
RESET CAMERA..
MENU REV.
PREVIOUS PAGE...
16
MENU
1.5.5