Camera Id - EverFocus True Day/Night Indoor Vandal Color Camera ED550 Operation Instructions Manual

SPECIAL
> CAMERA ID OFF
COLOR ADJ. <┘
SYNC. INT
MOTIION DET OFF
PRIVACY OFF
MIRROR OFF
SHARPNESS
RESET
RETURN <┘

5.8.1 CAMERA ID

Input the camera ID, and it will be appeared on the monitor.
1) Please direct the arrow to point to "CAMERA" by adjusting the switch to UP or
DOWN direction.
2) Select "ON" by adjusting the switch to LEFT or RIGHT direction.
3) Press SET button.
4) Maximum 15 letters can be used for the ID.
Adjust the switch to UP or DOWN direction to move the cursor to the
letter to be chosen.
Adjust the switch to UP, DOWN, LEFT and RIGHT direction to select an
ID.
Use SET button to lock in the letters.
5) Once a name has been selected, please choose a position where you would like
to display the name.
Move the cursor onto "POS" and press the SET button.
The name will appear at the top left hand corner.
Please adjust the switch toward 4 directions to find the desired position to
display the name.
6) If you would like to cancel the ID inputted, please move the cursor to "CLR",
and all the letters inputted will be deleted.
7) Select "END" and press SET button to complete ID input.
SPECIAL
> CAMERA ID
COLOR ADJ. <┘
SYNC.
MOTIION DET
PRIVACY
MIRROR
SHARPNESS
RESET
RETURN <┘
A
N
a
n
-
<-
ON <┘
ON
INT
OFF
OFF
OFF
ON <┘
B C D E
O P Q R
b c d e
o p q r
· 0 1
-> CLR
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _
CAMERA ID
F G H I J
S T U V W
f g h i j
s t u v w
2 3 4 5 6
POS
- 18 -
K L M
X Y Z
k l m
x y z
7 8 9
END