Commissioning
7.2 Power up
7.2
Power up
Before you power up
Make sure you have Installed the sensors as described in the FSS200 Installation Manual
support.industry.siemens.com/cs/document/109777112/sitrans-fss200?
dti=0&pnid=24498&lc=en-US).
Make sure you have connected the sensor cables as decribed in Sensor wiring (Page 30).
Powering up
1. Open the lid by lifting both latches.
2. Press the Power button.
Figure 7-1
The device is commissioned/operated with the touch keypad on the local display.
The graphic display above the keypad gives a menu-guided operation of the individual device
function/parameters. Successful operation of the key is confirmed by tactile feedback as key is
pressed.
①
②
Figure 7-2
38
Power button location
Full graphical display
Touch keypad
Local display
Operating Instructions, 11/2021, A5E50387341-AA
(https://
SITRANS FST090