Skoda Superb 2004 Owner's Manual page 75

74 Seats and Stowage
Head restraints Adjusting the height of a head restraint
– Grasp the side of the head restraint with both hands and push
it up or down in direction of arrow
is achieved if the top edge of the head restraint is at least at
eye level or higher.
Adjusting the angle of a head restraint
– The head restraint can be matched to the head of the occu-
pant by adjusting the angle in the direction of the arrow
Adjusting the angle of the head restraint provides enhanced
comfort for the user.
Removing and installing a head restraint
Fig. 54 Adjusting head
– Pull the head restraint out of the backrest of the seat as far as
restraint
the stop.
– Press the locking button in direction of arrow
pull the head restraint out.
– To re-insert the head restraint, push it down into the backrest
of the seat far enough until you hear the locking button
engage.
The head restraints of the front seats can be adjusted for angle and height
⇒ fig.
(about 15 mm). The middle rear head restraint is fixed.
Fig. 55 Removing a
The head restraints must be adjusted to match the size of the seat occu-
head restraint
pant. Correctly adjusted head restraints together with the seat belts offer
effective protection for the occupants.
54, the outer head restraints at the rear can be adjusted for height
⇒ fig.
A
55. Best protection
A
A
.
B
⇒ fig. 55
and