Table of Contents
Advertisement
106
Heating and air conditioning system
Air outlet vents
Fig. 100 Air vents at the front
Fig. 101 Air vents at the rear
Open air outlet vents
– Turn the vertical thumbwheel (not when in the end position).
Close air outlet vents
– Turn the vertical thumbwheel into the end position.
Redirecting air flow
– Swivel upward or downward the grille of the vents in order to
change the direction of the air flow using the vertically
arranged thumbwheel.
– Turn the horizontal thumbwheel on the vent to the right or left
in order to change the air flow to the appropriate side.
You can set the air supply to the individual vents with the air distribution
A
⇒ page 103, fig.
control
99. You can also set the vents 3 and 4
C
⇒ fig. 100
⇒ fig. 101
and 6
individually.
Unwarmed or cooled air will flow out of the air outlet vents according to the
A
⇒ page 103, fig. 99
setting of control dial
A
tions.
The rear footwell vents 7 are controlled together with the vents 5. Turn the
A
⇒ page 103, fig. 99
air distribution control
C
Using the air conditioning system economically
The compressor on the air conditioning system uses power from the
engine when in cooling mode which will effect the fuel consumption.
It recommended to open the windows or the doors of a vehicle for which
the interior has been strongly heated through the effect of direct sunlight
in order to allow the heated air to escape.
The air conditioning system should not be switched on while travelling
when the window is open.
and the atmospheric condi-
into the position
.
Advertisement
Table of Contents
