134
Communicating and Navigating
Telephone pre-installation at the front or rear*
(GSM III)
Initialisation of the adapter
– Withdraw the ignition key.
– Insert the adapter
must not be inserted in the adapter).
– Plug the adapter cable into the mobile phone socket.
– Switch on the ignition.
– Wait approximately 20 seconds, switch off the ignition and pull
the ignition key out of the ignition lock.
– Insert the mobile phone into the adapter (as specified in
manufacturer's instructions) and switch on the ignition.
Fig. 118 Universal tele-
phone connection at
An initialisation must be carried out:
the front
•
after the first connection of the adapter
•
after reconnecting the battery
•
after pulling out the adapter cable from the power socket for the mobile
phone
This enables you to make full use of the advantages of a normal carphone
("handsfree system" using a microphone integrated in the vehicle, optimal
transmission of signals using an external aerial etc.). The battery of the
mobile phone is also constantly charged.
A telephone mount is factory-fitted for the front mobile phone and for the
rear mobile phone. The front telephone mount is located on the front
center console
Fig. 119 Universal tele-
phone connection at
Adapter (Cullmann) and mobile phone are not factory-fitted by Škoda
the rear
Auto.
Please also refer to the additional instructions ⇒ page 135.
A
A
into the mount
A
B
⇒ fig.
118, the rear on the rear center console
(the mobile phone
⇒ fig.
119.