Table of Contents
Advertisement
202
Inspecting and Replenishing
Inspecting and Replenishing
Engine compartment
Opening and closing the bonnet.
Opening the bonnet
– Pull the unlocking lever below the dash panel on the driver's
Fig. 153 Bonnet
release lever
side
– Pull the handle
Closing the bonnet
– Pull the bonnet down far enough to overcome the force of the
pressurized gas spring.
– Then, allow the bonnet to drop into the lock - do not press
down on bonnet.
The bonnet jumps out of its lock as a result of the spring force. A handle
appears at the same time in the radiator grille.
⇒ fig.
153.
⇒ fig. 154
and lift the bonnet.
Fig. 154 Radiator
grille: handle
Advertisement
Table of Contents
