Deskset Installation - VTech Eris Terminal VDP658 Quick Start Manual

Deskset Installation

This section assumes that your network infrastructure is established and that your
IP PBX phone service has been ordered and configured for your location.
Deskset installation involves both the backup battery and the deskset. The deskset
is powered using the supplied power adapter. The deskset can be placed on a flat
surface or mounted on a wall.
Avoid placing the deskset too close to:
• Communication devices such as television sets, DVD players, or other cordless
telephones
• Excessive heat sources
• Noise sources such as a window with traffic outside, motors, microwave ovens,
refrigerators, or fluorescent lighting
• Excessive dust sources such as a workshop or garage
• Excessive moisture
• Extremely low temperature
• Mechanical vibration or shock such as on top of a washing machine or work bench
Installing the backup battery
Install the backup battery as shown below. In the event of a power failure, the
charged backup battery allows the deskset to operate. The backup battery will be
charged when you connect the AC power adapter to a wall outlet not controlled by a
wall switch.
1. Press down on the tab to open the battery compartment cover.
11