Correct Center Mode - Pentax R-2500DN Series Instruction Manual

10.8 Correct Center Mode

Correct Center Mode is the function to adjust the optical axis of the camera, which can be
changed by aging, temperature change and/or vibration during transportation. In the event that
the aimed point and the Point Mark do not coincide, adjust the camera axis by using Correct
Center Mode.
[Procedure]
Two reference points are used for the adjustment. Distance measurement and Point Mark
Position adjustment are carried out for each reference point. The procedure is as follows;
To enter Correct Center Mode, select "3.Correct
Center" in RED MARK & CAMERA SETTINGS –
SETUP.
<Reference point 1>
Set the reference point 1 at the distance of 20m or
more away from the intsrument.
※Use "CCM TARGET 1" shown in the last page of
this manual as a target.
Aim the target placed at the reference point 1, and
press [MEAS].
When the measured distance is displayed, a photo is
taken, and the screen proceeds to "CorrectCenter 1
2/3".
Move the PointMark shown on the camera display
by carefully using function keys for accurate
PointMark positioning.
77