Setup - Pentax R-2500DN Series Instruction Manual

The screen can be moved only when the images is zoomed more than double.

10.5 Setup

Press [F2] [SETUP] key in RED MARK &
CAMERA SETTINGS screen. The SETUP is a
mode to carry out offsetting an optical axis and
formatting memory.
1.Format
Format the taken pictures in SD card.
See: FORMAT is a function to format an SD card. Make sure to format the SD card before
using with R-2500DN.
Pictures taken and data measured during the special function and the image data which is
taken when the camera is activated in Mode are recorded on the the SD card in the order of
the pictures taken.
When the job name (file) specified by the special function is changed, this data is recorded on
the SD card in the order of the pictures taken.
When using some job names (file) separately, we recommend that you prepare some SD cards
and use a job name (file) and an SD card as one pair.
2.ResetALL
Initialize all the data in Setting.
3.Correct Center
This is a mode for deciding the offset value of top/bottom/left/right of Point Mark which is
displayed in the picture during shooting.
Refer to "10.8 Correct Center Mode".
4.Ver.disp
Display software information of version.
68