Nuvo NV-P200 Series Product Manual page 9

Player portfolio audio system
Hide thumbs Also See for NV-P200 Series:
Table of Contents

Advertisement

NUVO
NV-P300-xx Player Preamplifier Front Panel Features (Wireless or Ethernet Connectivity)
1.
Volume Down: Press to decrease audio volume.
2.
Volume Up: Press to increase audio volume .
3.
Mute: Press to mute/un-mute audio.
4.
LED Indicator: Indicates status of NVP300 (see table in section 6.1 for details).
NV-P300-xx Player Preamplifier Back Panel Features (Wireless or Ethernet Connectivity)
1.
Audio In: This is a combination 3.5mm stereo line level and mini TOSLINK optical input. This input will automatically
decipher the difference between an analog line level input and TOSLINK optical input. To connect to the TOSLINK
input use a standard TOSLINK cable with the supplied TOSLINK mini-adapters or use a TOSLINK to TOSLINK mini-
cable. The line input is available to any player zone within the Nuvo Player Portfolio System.
2.
Audio Out*: This is a combination 3.5mm stereo line level and mini TOSLINK optical output. This 3.5mm stereo out-
put provides the local line level audio signal to an additional amplifier, powered subwoofer,or headphones. To connect
to the TOSLINK input use a standard TOSLINK cable with the supplied TOSLINK mini- adapters or use a TOSLINK-to-
TOSLINK minicable.
3.
USB**: Any USB storage device can share music content with the Nuvo Player Portfolio System through this port.
4.
Ethernet: This RJ45 port allows for a wired connection directly to the GW100 Gateway or directly to the network
router.
5.
AC: The switchable universal power supply will accept any incoming AC voltage worldwide.
* If the audio output of a video device is the source,there will be no perceptible delay in audio if a single player zone is se-
lected. If two or more player zones are playing the audio from the video source, an audio buffer will be engaged which will
add a delay between the audio and video source.
** Not all USB drives are supported natively by the USB port as current draw is limited to XX amps. If a device that exceeds
this is used, an external power supply must be used.
®
9

Advertisement

Table of Contents
loading

Table of Contents