Nuvo NV-P200 Series Product Manual page 21

NUVO
®
Press "Next" on the Gateway Connection confirmation
screen. If "Connected" does not display, check the network
connections and repeat the steps. (Fig. 37, Fig. 38)
Fig. 38
Fig. 37
Prepare the Nuvo player to be joined to the Gateway and
press "Next." (Fig. 39)
Press the VOLUME UP and MUTE buttons simultaneously
on the wireless player to initiate the binding process. NOTE:
The blue LED on the Gateway will begin to flash. (Fig. 40)
Fig. 39
Fig. 40
Once bound, the wireless zone will show as Connected. Then
press "Next." (Fig. 41)
NOTE: If a software update is needed, the unit will initiate in-
stallation and display "Installing Update." After it is updated,
select "Next" to move to the next step of the process.
Choose a name for the zone and press "Next." NOTE: A
name can be later edited by selecting "Edit Name," shown at
the bottom of the app screen. (Fig. 42)
Fig. 41
Fig. 42
21