Nuvo NV-P200 Series Product Manual page 8

NUVO
NV-P3500-xx 3-Zone Player Front Panel (Ethernet Connectivity-B&O ICE power Amplification)
1. Power Button: The Power button toggles the power on and off to the NVP3500-xx component. It is also used in the
reset procedure for each of the zones.
2. Setup Buttons: Each of the three zones housed in the NVP3500-xx have a separate setup button used in the initial
system setup process. These buttons are also used in the zone reset procedure. When the system is set up, each
zone has an associated LED that indicates that zone's power status (see table in section 6.1 for details).
3. Zone 3 USB**: The USB input can be used to add digital music files to the system's music library. When a USB hard
drive is inserted into the input, the system will recognize the drive, scan the files and automatically add them to the
library.
NV-P3500-xx 3-Zone Player Back Panel Features (Ethernet Connectivity-B&O ICE power Amplification)
1. Ethernet: The NVP3500-xx is designed to connect directly to the network LAN. The second port enables multiple
Players to share the same network connection within one system.
2. Zone 1 and Zone 2 USB: Any USB storage device can share music content with the Nuvo Player Portfolio System
through these ports. Each port can accept a separate drive.
3. Trigger In: These optional inputs are for 3-12 volt input triggers (for possible use with a future firmware release).
Trigger Out: These 3.5mm outputs act as a voltage (5V, 20mA) trigger for external equipment, to turn on an external
amp when audio is present on the zone.
4. Line In/Line Out*: Each of the three zones have an independent RCA line input for a local analog audio source,and
RCA audio output for use with an additional amplifier or subwoofer.
S. Speaker Outputs***: Each of the three zones has a modular connector that provides a maximum 200 Watts @ 4 Ohm
output.
6. AC: The universal power supply will accept any incoming AC voltage worldwide .
* If the audio output of a video device is the source, there will be no perceptible delay in audio if a single player zone is se-
lected. If two or more player zones are playing the audio from the video source, an audio buffer will be engaged which will
add a delay between the audio and video source.
** Not all USB drives are supported natively by the USB port. USB drives should meet USB 2.0 requirements.
*** Bang & Oulfsen intelligent ICEpower® audio technology is used in the P3500 for superior amplification.
®
8