Nuvo NV-P200 Series Product Manual page 29

NUVO
Fig. 75
Fig. 77
Fig. 78
®
Fig. 76
Once the zone is successfully added, select "Done." (Fig. 77)
Then add another zone, or select "Done." (Fig. 78)
Once bound, the wireless zone will show as Connected. Then
press "Next."
NOTE: If a software update is needed, the unit will initiate
installation and display "Installing Update." After the update
has completed, select "Next" to move to the next step of the
process. (Fig. 75)
Choose a name for the zone and press "Next." NOTE: A
name can be later edited by selecting "Edit Name," shown at
the bottom of the app screen. (Fig. 76)
29