Nuvo NV-P200 Series Product Manual page 25

NUVO
Fig. 55
Fig. 57
Fig. 59
®
Fig. 56
Fig. 58
Fig. 60
Choose a name for the zone and press "Next" to enter the
Wireless Setup step. NOTE: A name can be later edited
by selecting "Edit Name," shown at the bottom of the app
screen. (Fig. 55)
Once added, "Successfully added" will display. Select "Wire-
less Setup." (Fig. 56)
The app will search for available wireless networks. (Fig. 57)
After the networks have been discovered, select the network
which the Nuvo Player app is connected to. (Fig. 58)
Enter the password for the selected wireless network and
press "Join."
NOTE: The system's previously used wireless network will
be listed under "Other Devices Saved Networks." Select the
previously used network and press "Join" to use the stored
credentials. If the credentials have changed, select another
network or select "Other" and follow the steps. If the correct
password is entered the app will display "Joining."
NOTE: If the incorrect password is entered, the app will
show "Connection Failed" and allow you to try again. (Fig. 59,
Fig. 60)
25