Nuvo NV-P200 Series Product Manual page 5

NUVO
NV-P100-xx Single Zone Player Front Panel Features (Wireless or Ethernet Connectivity)
1. Volume Down: Press to decrease audio volume.
2. Volume Up: Press to increase audio volume .
3. Mute: Press to mute/un-mute audio.
4. LED Indicator: Indicates status of NVP100-xx (see table in section 6.1 for details).
NV-P100-xx Single Zone Player Back Panel Features (Wireless or Ethernet Connectivity)
1. Ethernet: This RJ45 port aIlows for a wired connection directly to the NVGW100-xx Gateway or directly to the network
router.
2. USB**: A USB storage device can share music content with the Nuvo Player Portfolio System through this port.
3. Audio In: This 3.5mm stereo in put will accept any analog line level audio signal. The local audio source is amplified
by the local player, as well as provided as an additional source selection in any other associated audio zones within
the NuVo Player Portfolio Audio System.
4. Audio Out*: This 3.5mm stereo output provides the local line level audio signal to an additional amplifier, powered
subwoofer, or headphones.
S. Speaker Outputs*: These binding posts provide an amplified audio signal to any connected speakers. The maximum
output of the P1OO is 40 Watts at 8 Ohm stereo.
6. AC: The switchable universal power supply will accept any incoming AC voltage worldwide.
* If the audio output of a video device is the source, there will be no perceptible delay in audio if a single player zone is se-
lected. If two or more player zones are playing the audio from the video source, an audio buffer will be engaged which will
add a delay between the audio and video source.
**Not all USB drives are supported natively by the USB port. USB drives should meet USB 2.0 requirements.
®
5