Table of Contents
Advertisement
Editing Sounds and Other Settings for Kits (Kit Edit)
Setting the Kit Level
(Kit Level)
Sets the volume of the kit.
1 .
On the KIT EDIT screen, select
press
"SELECT"
(F2 button)
The KIT LEVEL screen appears.
2 .
Use the
[+] [–]
buttons to edit the value .
Value
Parameter
[+] [-] buttons
-INF,
Level
-60.0–+6.0
[dB]
units of 0.5)
3 .
Press the F1 button several times to return to the top
screen .
Mute Group
(Mute Group)
Mute group settings let you specify that when you strike a pad, other
pads in the same mute group are muted (silenced).
This is useful for sounds that sustain such as gongs or chappa (hand
cymbals), so that you can mute their sound when hitting another pad
and so forth.
1 .
On the KIT EDIT screen, select
press
"SELECT"
(F2 button)
The MUTE GROUP screen appears.
2 .
Use the
[H] [I]
buttons to select the item, and then
use the
[+] [-]
buttons to change the setting .
Parameter
Value
[ H ] [ I ] buttons
[+] [-] buttons
PAD1H Send
PAD1H Receive
PAD1R Send
PAD1R Receive
OFF,
GRP 1–4
PAD2H Send
PAD2H Receive
PAD2R Send
PAD2R Receive
3 .
Press the F1 button several times to return to the top
screen .
20
"Kit Level"
and then
.
Explanation
Here's how to set the volume of the kit.
(in
"Mute Group"
and then
.
Explanation
These parameters specify the mute group
number.
When you strike the pad of the number
specified in Send, the sound of the pad
assigned to the same number in Receive
is muted.
*
The pad is not be muted if you specify the
same number in MUTE Send and MUTE
Receive for the same location (e.g., head or
rim) of the same pad.
Setting How the Nuance Changes According to
Where You Strike the Pad
1 .
On the KIT EDIT screen, select
then press
"SELECT"
(F2 button)
The KIT PAD CONTROL screen appears.
2 .
Use the
[H] [I]
buttons to select the item, and then
use the
[+] [-]
buttons to change the setting .
Parameter
Value
[ H ] [ I ] buttons
[+] [-] buttons
PAD1 Rim Detect
OFF, ON
PAD2 Rim Detect
PAD1 Pos Detect
OFF, ON
PAD2 Pos Detect
PAD1 Pos Area
-5–+5
PAD2 Pos Area
3 .
Press the F1 button several times to return to the top
screen .
(Kit Pad Control)
"Kit Pad Control"
and
.
Explanation
Sets whether the rim is detected.
Sets whether to change the sound (ON) or
not (OFF) according to where you strike the
pad (head).
Sets the strike point area for the head.
Higher positive values widen the striking
area further outwards from the center.
Advertisement
Table of Contents
