Huawei AP Series Quick Start Manual page 8

Device Introduction
Table 3 Interfaces on outdoor APs
AP6610DN-AGN
Table 4 Interfaces on outdoor APs
No. Name
1 ETH port
(ETH/PoE port)
2 Default
3 SFP port
4 AC power port
5 2.4 GHz
antenna port
6 5 GHz
antenna port
7 Ground screw
3 1
5 5
Connected to a switch or PD.
Press and hold down the Reset button for 3 seconds to restore the
factory settings and restart the AP.
Connected to fiber. An optical module is required.
Connected to an AC power module.
A port connected to the 2.4 GHz antenna.
A port connected to the 5 GHz antenna.
Connect the ground cable to the AP with a ground screw.
7
2
4 7
6
Description
6