Huawei AP Series Quick Start Manual page 22

Power-on
Power on the AP and check the indicator status to determine the system running status.
NOTE
The AP6510DN-AGN supports the PoE function that complies with 802.3at.
Table 8 Indicator status of the AP6510DN-AGN and AP6610DN-AGN
Information SYS
Type
Steady
green
Startup
Blinking
status
green
Steady
red
0.5Hz
Running and
connection
0.5Hz
Link Wireless
NA NA
NA NA
NA NA
Off
Blinking
green
Off
Blinking
yellow
Blinking
green and
yellow
alternately
Off
Blinking
Steady or
green
Blinking
green
Blinking
yellow
Blinking
green and
yellow
alternately
21
Description
The device is being started.
The system is working properly.
The system fails to load the DRAM or system
software.
The system is working properly. However, the
Ethernet is not connected. Radios are disabled
and no user is connected to the AP.
The system is working properly, but the Ethernet
is not connected. The AP has wireless users
connected to the 2.4 GHz band and is
transmitting data. The indicator blinks more
quickly when more packets are being transmitted.
The system is working properly, but the Ethernet
is not connected. The AP has wireless users
connected to the 5 GHz band and is transmitting
data. The indicator blinks more quickly when
more packets are being transmitted.
The system is working properly, but the Ethernet
is not connected. The AP has wireless users
connected to the 2.4 GHz and 5 GHz bands and
is transmitting data.
The system is working properly, the Ethernet is
connected, and radios are disabled. The indicator
blinks more quickly when more data is being
transmitted.
The system is working properly, and the Ethernet
is connected. The AP has wireless users
connected to the 2.4 GHz band and is
transmitting data. The indicator blinks more
quickly when more packets are being transmitted.
The system is working properly, and the Ethernet
is connected. The AP has wireless users
connected to the 5 GHz band and is transmitting
data. The indicator blinks more quickly when
more packets are being transmitted.
The AP has wireless users connected to the 2.4
GHz and 5 GHz bands and is transmitting data.
The indicator blinks more quickly when more
packets are being transmitted.