Installing the AP
(4) Pinch the wall-mounting bracket on the
expansion bolts, and fasten the flat washer, spring
washer, and nuts in order.
Against the vertical pole
(1) Determine the AP installation position, slide the
hose clamp through the hole of the wall-mounting
bracket and attach it to the pole, and use the hex
key to secure screws on the hose clamp.
Against the horizontal pole
NOTE
The procedure for installing the AP6610DN-AGN against a horizontal pole is similar to the procedure
for installing the AP6610DN-AGN against a vertical pole.
(5) Slide the AP into the wall-mounting bracket
and fasten the screw on the wall-mounting
bracket.
Screw
(2) Slide the AP into the wall-mounting bracket and
fasten the screw on the wall-mounting bracket.
13
1
2
2