Huawei AP Series Quick Start Manual page 12

Installing the AP
3. Determining the Installation Position
When determining the AP installation position, comply with the following rules:
 Install the AP free from high temperature, dust, toxic gases, flammable or explosive materials,
unstable voltage, or electromagnetic interferences, such as radar stations, launch pads, or
transformer substations. The AP should also be away from great vibrations and strong noises.
 Install the AP away from water, drippings, and dews.
 Install the AP in a hidden position in order not to disturb people.
 Consider the communication network planning and the technical requirements of the equipment in
the project design. In addition, hydrographic, geological, seismic, power supply, and transportation
factors must be considered.
Outdoor APs can be installed on poles or wall. The pole diameter is 48 mm to 114 mm and the
thickness must be at least 2.5 mm. The AP must be installed by the installation personnel in the
position determined by site survey. The recommended AP installation space is as follows:
Figure 2 AP dimensions (unit: mm)
Figure 3 Recommended AP installation space (unit: mm)
11