Huawei AP Series Quick Start Manual page 25

Logging In to the AP
Step 4 Run the telnet 192.168.0.1 command to log in to the AP.
Step 5 Enter the default user name and password admin. If the user view is displayed, you have
logged in successfully.
NOTE
Run the exit command to exit from the Telnet window. When the system fails to exit from the Telnet
window:
 If you logged in to the AP from an AC or a switch, press Ctrl+T to return to the AC or switch view.
This operation does not affect the AP operation.
 If you logged in to the AP from a PC, directly close the Telnet window. This operation does not
affect the AP operation.
24