Table of Contents
Advertisement
During the pyrolytic cycle the fans
produce a more intense level of
noise due to a greater rotation
speed. This is an absolutely normal
operation, intended to provide
more effective heat dispersal.
At the end of the pyrolytic cycle,
the fans will continue to operate for
long enough to avoid overheating
the walls of adjacent units and the
front of the oven.
Setting of programmed pyrolytic cycle
It is possible to program the pyrolytic cycle
start time like all other cooking functions.
1. After selecting the pyrolytic cycle
duration, press the control knob. The
display shows the current time and the
symbol comes on.
2. Turn the control knob to set the time you
wish the pyrolytic cycle to finish.
3. After a few seconds, the symbols
and
remain lit steadily and the
appliance waits for the set start time in
order to start the cleaning cycle.
It is not possible to select any function
once the door lock device has been
activated. It remains possible,
however, to switch off the appliance
using the specific controls.
Cleaning and maintenance
4.6 Extraordinary maintenance
Removing and installing the door seal
(auxiliary oven only)
To remove the seal:
• Release the hooks in the 4 corners and
pull the seal outwards.
To install the seal:
• Attach the hooks in the 4 corners of the
seal.
Seal maintenance recommendations
The seals should be soft and flexible.
55
Advertisement
Table of Contents
