Table of Contents
Advertisement
7. At the end of the cooking cycle, "function
ended" is shown on the display and a
buzzer will sound that can be
deactivated by pressing or turning one of
the two knobs or opening the door.
To extend the cooking time
manually, press the control knob
again. The appliance will resume
its normal operation with the
previously selected cooking
settings.
For safety reasons, it is not possible
to set the end of cooking time by
itself without setting the cooking
duration.
Use
Modifying the data set during
programmed cooking
After modifying the cooking
duration, the end of cooking time
must be set.
During operation, it is possible to modify
programmed cooking duration:
1. When the
steadily and the appliance is waiting for
cooking to start, press the control knob.
The
symbol will start flashing.
2. Turn the control knob to change the
previously set cooking time.
3. Press the control knob again. The
symbol switches off and
flashing. The display shows the end of
cooking time.
4. Turn the control knob to delay the end of
cooking time.
5. After a few seconds the
symbols stop flashing and programmed
cooking restarts with the new settings.
If the cooking duration is modified,
the cooking end time is deleted.
and
symbols are lit
starts
and
21
Advertisement
Table of Contents
