Use Water Temperature Track (Water Temp Track) - JRC JMA-9123-7XA Instruction Manual

3.5.8

Use Water Temperature Track (Water TEMP Track)

Set the corresponding conditions for the water temperature value and the color of
own ship's track by performing the operation below.
Procedures
1) Open the Water TEMP. Setting menu by performing the menu
operation below
The Water TEMP. Setting menu will appear.
Enter a value of the boundary water temperature for each item according to the table below
to set up the corresponding conditions for the water temperature value and the color of own
ship's track.
For example, if 10.0 ~ is entered for 1. , 13.0 ~ is entered for 2. , and 15.0 ~ is entered for
3. , the area with a water temperature of less than 10.0 ? ? is indicated by white tracks, the
area with a water depth of 10.0 ~ to 13.0~ is indicated by light blue tracks, and the area with
a water depth of 13.0 ~ to 15.0 ~ is indicated by blue tracks.
JMA-9100 Instruction Manual
Track
→ 7. Water TEMP. Setting
Water temperature
value
1. xx.x ℃ Min
2. xx.x ℃
3. xx.x ℃
4. xx.x ℃
5. xx.x ℃
6. xx.x ℃ Max
3－ 45
> >
3.BASIC OPERATION 3.5 USE OWN SHIP'S TRACK
Color of track
White
Gray
Blue
Green
Yellow
Pink
Red
3