Setting Up The Display Of Depth Graph; Setting Up The Display Of Water Temperature Graph - JRC JMR-5410-4X Instruction Manual

11.1.14 Setting up the display of depth graph

When [Depth Graph] is selected in the classification pane, the "Depth Graph" dialogue is displayed in
the editing pane.
[Operation procedure]
Open the "Depth Graph" dialogue by using the following procedure.
[Menu] button → View → Depth Graph
The setting contents are shown in the following table.
Setting item
Depth Range Select a depth range of the depth graph.
Time Range Select a time range of the depth graph.
Reference Select a reference of the depth.
11.1.15 Setting up the display of water temperature
graph
When [Water TEMP Graph] is selected in the classification pane, the "Water TEMP Graph" dialogue is
displayed in the editing pane.
[Operation procedure]
Open the "Water TEMP Graph" dialogue by using the following procedure.
[Menu] button → View → Water TEMP Graph
The setting contents are shown in the following table.
Setting item
Graph Colour Select a colour of the water temperature graph.
Time Range Select a time range of the water temperature graph.
Description of setting
Description of setting
11-19
Setting value
AUTO / 50m / 100m /
250m
10min / 15min / 30min /
60min / 12hour
AUTO / KEEL
Setting value
Grey / Blue / Cyan /
Green / Yellow /
Orange / Dark Red
10min / 15min / 30min /
60min / 12hour
Section 11 Setting up Screen View
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録