JRC JMA-9123-7XA Instruction Manual page 158

>
JMA-9100 Instruction Manual 3.BASIC OPERATION
2) Set whether to make corrections or not.
3) Input the correction value.
Press the
for longitude.
For how to input numeric data on the numeric value input screen, see Section 3.3.4
"Operation on Numeric Value, Latitude / Longitude and Character Input menu".
3.4.16.1 Set Drift Correction
The direction and speed of the drift are set.
This function can be used only when
data.
Procedures
Open the Set/Drift Setting menu by performing the menu
1)
operation below.
Set whether to make corrections or not.
2)
For menu operation, see Section 3.3.3 "Basic Menu Operation".
Enter the correction value for tidal current.
3)
For how to input numeric data on the numeric value input screen, see Section 3.3.4
"Operation on Numeric Value, Latitude / Longitude and Character Input menu".
>
3.4 GENERAL RADAR OPERATION
1. Heading Correction
⇔
Off
＋ －
or button to select south and north for latitude or the east and west
Main
6.NAV Equipment Setting
→
→
: Direction of tidal current (true bearing)
2.Set
: Speed of tidal current
3.Drift
3－ 38
On
or is selected for ship-speed
MAN LOG
3. Set/Drift Setting
1. Correction
⇔
Off On