Dynamic Modulation (Dmod) - Korg KROSS Operation Manual

Using Effects
If you want the edited settings to be saved in the
KROSS, be sure to execute the Write function.
7. If you want the Input settings of Global mode to be
used in each mode, add a check mark to G-SET. If you
want to use individual input settings in Program,
Combination, and Song modes, clear this check mark.
66

Dynamic modulation (Dmod)

Dynamic modulation (Dmod) lets you use MIDI messages
or the KROSS's controllers for realtime control of specific
effect parameters.
Another way to control effect parameters is to use MIDI/
Tempo Sync, which allows the LFO speed of a modulation
effect or the delay time of a delay effect to be synchronized
to the tempo of the arpeggiator or sequencer.
(see "Dynamic modulation (Dmod) and Tempo
Synchronization" on page 198 of the Parameter Guide)