Midi; Damper Pedal; Media; Connections With A Computer - Korg KROSS Operation Manual

Appendices
□ Could Master Volume be assigned to Foot Pedal, and
could that pedal be lowered? If you want to adjust the
volume of the performance while you record, use
Expression or Volume. → p.21

MIDI

The KROSS does not respond to incoming MIDI data
□ Are all MIDI cables or USB cables connected correctly?
→ p.22
□ Are the KROSS's receive settings (such as the global
MIDI channel and the timbre/track's receive channel) set
to match the channels of the transmitting device?
→ PG p.299
The KROSS does not respond correctly to incoming MIDI
data
□ Are the G-MIDI> FILTER settings MIDI Filter Enable
Program Change, Enable Bank Change, Enable
Control Change, Enable AfterTouch, and Enable
Exclusive each checked? → PG p.162
□ Does the KROSS support the types of messages that are
being sent to it? → PG p.299
Can't recall programs of the desired bank
□ Is the Bank Map setting correct? → PG p.158

Damper pedal

Damper response is wrong
□ Execute the Half Damper Calibration function
(GLOBAL> BASIC) to correctly calibrate the half-
damper pedal sensitivity. → PG p.176

Media

Can't format the SD card
□ Does the media meet the requirements for use on the
KROSS? → p.21
□ Is the media inserted correctly? → p.21
□ Could the media's Lock (write protect) switch be on?
Can't save/load data on the SD card
□ Is the media inserted correctly? → p.21
□ Has the media been formatted? → p.108
□ Could the media's Lock (write protect) switch be on?
SD card is not recognized
□ The date of the saved file is incorrect.
• Remove the SD card and check whether the card's
contacts are dirty. If they are dirty, clean them gently
with a dry cloth or a cotton swab.
* Do not use liquids. Take care not to touch the contacts
directly with your hands or with a metal object.
114
The date of the data is wrong
□ The files you saved have the incorrect date.
• The KROSS does not contain an internal calendar. Use
the Set Date/Time function (MEDIA> UTILITY page)
to specify the current time and date before you save the
data. → p.108
Data that you saved from your computer to an SD card
does not appear in MEDIA mode.
• Copy the data to the KORG/KROSS/DATA folder. This
folder will be created when you use the KROSS to
format the card. → p.100
• Is the file name extension format appropriate? → p.100

Connections with a computer

The KROSS does not respond to MIDI data sent from
outside
□ Is the USB cable connected correctly? → p.22
The computer does not detect the KROSS
□ Are the USB cables connected correctly?
An error occurs when you disconnect from the computer
□ Never disconnect the KROSS from the computer while
your host application is in use.
While connected, you are asked to install software or a
device driver
□ Does the operating system or version of your computer
support the KROSS?
When using USB, sound processing is slow, or the tempo is
unstable
□ Is the KORG USB-MIDI driver installed correctly?
• You must install the dedicated Korg driver in order to
use the KROSS via USB MIDI.
If your computer's operating system is Windows, you'll
need to install the driver for each USB port where you
connect the KROSS.
If you connect the KROSS to a different USB port than
the one you used when installing the KORG USB-MIDI
Driver for Windows, you'll need to reinstall the KORG
USB MIDI driver.
Your computer does not recognize an SD card that was
formatted by the KROSS
• Does the SD card reader support SDHC cards?