Loading Data; Data That Can Be Loaded; Loading Data From Sd Card - Korg KROSS Operation Manual

Loading data

Data that can be loaded

Loading from SD card
You can load the following data from SD card.
• PCG files:
Programs, combinations, drum kits, global settings
(including favorites data), user arpeggio patterns
• .SNG file:
Song
• .MID file:
Standard MIDI file (SMF) format
• WAV files:
Import into the audio recorder (44.1 kHz/48 kHz, 16-bit,
stereo files)
Note: For details on the SD cards that can be used, please
see page 21.
Loading the preloaded data and demo songs
You can load the factory settings and demo songs back into
the KROSS's internal memory. For the procedure, please see
"Loading the preloaded data" on page 109.

Loading data from SD card

Loading all Programs, Combinations, Drum
Kits and Arpeggio patterns
Here we'll explain how to load all data from a .PCG file
containing Programs, Combinations, Drum kits, Global
settings, and User Arpeggio patterns in a single operation.
Before loading this data, make sure that the Global
mode Memory Protect check box is cleared. (see
"Protecting the memory" on page 98)
1. Make sure that the SD card is in a state that allows
loading. (see "Inserting/removing an SD card" on
page 21)
2. Access the MEDIA> FILE page.
Hold down the EXIT button and press the GLOBAL/
MEDIA button.
3. Use the cursor buttons ▲▼ to select the .PCG file
that contains the program or combination data that
you want to load.
Note: The .PCG files and .SNG files are at the top level.
If you don't see them, press the cursor button ◄ to
change levels. (see "Files and data structures that the
KROSS can recognize" on page 101)
Loading data Data that can be loaded
4. Choose the Load selected function.
Press the FUNCTION button. Use the ▲(PAGE–) button
to choose Load selected, and then press the OK (MENU)
button. A dialog box will appear.
5. Press the OK (MENU) button. All data from the .PCG
file will be loaded into the KROSS.
Never remove the media while data is being loaded.
Loading individual data from a .PCG file
The KROSS lets you load Programs, Combinations, Drum
kits, User Arpeggio patterns individually or by individual
banks.
Be aware that if you change the order of Programs, the
sounds played by Combinations may also be affected.
As an example here, we will explain how a combination
(A012) saved in bank A can be loaded into U000.
1. Select the combination that you want to load.
Use the cursor buttons ▲▼ to select a file, and press the
cursor button ► to move to the next level.
[PCG] .PCG→[Cmb] Combinations→[Cmb] Bank
A→[Cmb] 012
2. Choose the Load selected function.
Press the FUNCTION button. Use the ▲(PAGE–) button
to choose Load selected, and then press the OK (MENU)
button. A dialog box will appear.
3. Specify the load-source combination in the From
section; and specify the load-destination combination
(U000) in the To section.
Note: The load-destination will be bank U.
4. Press the OK (MENU) button to execute loading; the
loaded combination will be assigned to U000.
107