Combination Categories And Numbers; Using Controllers To Modify The Sound; Performing With The Arpeggiator, Drum Track Or Step Sequencer - Korg KROSS Operation Manual

Playing and editing Combinations
Combination categories and
numbers
The sounds of the KROSS are organized by type into
categories; within each category, an index number is
assigned to each sound. All combinations are also assigned a
bank and combination number that are used to recall that
combination via MIDI.
Note: Depending on the bank, there are limitations on where
a combination can be saved. For details, please see "Saving
data" on page 102.
Category and index number
Category Index number (bank number)
PIANO 000 (A000)...027 (A027)
E.PIANO 000 (A028)...019 (A047)
ORGAN 000 (A048)...014 (A062)
BELL 000 (A063)...012 (A075)
STRINGS 000 (A076)...022 (A098)
BRASS 000 (A099)...015 (A114)
SYNTH LEAD 000 (A115)...042 (B029)
SYNTH PAD 000 (B030)...028 (B058)
GUITAR 000 (B059)...017 (B076)
BASS 000 (B077)...044 (B121)
DRUM/SFX 000 (B122)...005 (B127)
USER 000...127 (U000...U127)
Index number
With the factory settings, the 256 preload combinations of
banks A and B are organized into the categories PIANO–
DRUM/SFX. Within each category, the combinations are
assigned an index number starting with 000.
The 128 initialized combinations of bank U (USER) are
assigned to the USER category.
Category
Combination sounds are organized into the 12 categories that
are listed in the table above. A combination category icon is
shown on the upper left side of the display. The [USER]
category icon is shown at the left of the PIANO–DRUM/
SFX icon.
Bank number
The bank number indication shows the number used for
MIDI transmission and reception. Since the conditions for
saving will differ depending on the bank, this provides a
helpful guide. For more about banks, please see "Bank
numbers and conditions for saving" on page 102.
For details on combinations, please see the separate "Voice
Name List."
Timbre icon information
The lower line shows icons indicating the category of the
timbre, the timbre used by the arpeggiator, and the timbre
used by the step sequencer.
42
Using controllers to modify the
sound
In addition to using the keyboard, the KROSS lets you
control the sound by using the pitch bend wheel, modulation
wheel, SW1 and SW2 buttons, damper pedal, and foot
switch or foot pedal.
These controls let you modify the tone, pitch, volume,
effects, etc. in realtime as you play.
• Pitch bend wheel, modulation wheel, SW1, SW2 buttons
→ p.1
• Damper pedal, foot switch/pedal → p.20
• TEMPO knob, TAP button → p.5
Performing with the arpeggiator,
drum track or step sequencer
Based on the note data it receives from the keyboard or from
the MIDI IN connector, the arpeggiator can generate a wide
range of phrases and patterns including arpeggios, guitar or
keyboard backing riffs, bass phrases, or drum patterns. A
combination lets you use two arpeggiators. For more about
the arpeggiator, please see page 67.
The Drum Track plays a variety of drum patterns using the
drum program that you've assigned to the desired timbre.
For more about the Drum Track, please see page 77.
The step sequencer is a function that lets you create and play
drum patterns in a way that's similar to the Drum Track. You
can create and play drum patterns by turning on/off buttons
1–16 located on the right side of the front panel. For more
about the step sequencer, please see page 81. The step
sequencer is assigned to timbre 16.
You can play a combination along with an accompaniment
provided by the Drum Track and the step sequencer.
Arpeggiated phrases, the Drum Track, and the step
sequencer pattern can all be synchronized, and you can also
play along with them.