Table of Contents
Advertisement
LOG INSTALLATION:
Note: Logs are placed in appliance in alphabetical order.
1. (LOG A):
Place Log A into appliance as shown in
Figure 5. The notch on the bottom of the left end should
rest on the left grate tine. The right end of Log A should
rest against the rear of the right grate tine, and in front
of the "Log A" pin indicated in Figure 4. Slide Log A
toward the front of the appliance.
LOG CONTACTS RIGHT GRATE TINE
NOTCH FOR LOG G
NOTCH FOR LOG B
A
NOTCH FOR LOG C
LOG RESTS ON GRATE TINE
Figure 5. Log A Installed
2. (LOG B): Locate the pin for Log B on Figure 4. Position
Log B in appliance with notches toward the rear of
appliance. Middle of log should be placed against the
log pin at the rear and the front of Log B is positioned
in the notch on Log A. See Figure 6.
NOTCH FOR LOG D
Figure 6. Log B Installed
60
Majestic • DBDV36PLATIN, DBDV36PLATIL, DBDV42PLATIN, DBDV42PLATIL Installation Manual • 2454-980 Rev. F • 5/17
NOTCH FOR LOG E1
B
A
3. (LOG C): Locate the pin for Log C1 on Figure 4.
Position Log C1 in appliance as shown in Figure 7. The
rear of the log will rest against the pin with the left side
touching the left refractory. The narrow end of the log
should be pivoted right until it contacts the burner skirt.
LOG CONTACTS REFRACTORY
LOG CONTACTS
BURNER SKIRT
Figure 7. Log C1 Installed
4. (LOG D): Locate the pin for Log D in Figure 4. Position
the log in the appliance as shown in Figure 8. The base
of the log (wider end) will rest against the log pin and
will contact the grate tine. The top (narrow end) of the
log should rest in the notch on Log B.
LOG D PLACED IN NOTCH ON LOG B
C1
D
LOG PIN
LOG CONTACTS GRATE TINE
Figure 8. Log D Installed
B
C1
A
B
A
Advertisement
Table of Contents
