Testing The Printer; Plugging In The Printer - Epson FX-870 User Manual

Testing the Printer

Before connecting your printer to a computer, use the built-in self
test to see that the printer is working properly.

Plugging in the printer

1. Make sure the printer is turned off.
2. Check the label on the back of the printer to make sure the
voltage required by the printer matches that of your electrical
outlet.
CAUTION: If the rated voltage and your outlet voltage do
not match, contact your dealer for assistance. Do not plug
l
in the power cord.
3. If the power cord is not attached to the printer, connect it to the
AC inlet on the printer's rear panel.
4. Plug the power cord into a properly grounded electrical outlet.
Setting Up the Printer
1-10