Options - Epson FX-870 User Manual

Options

When you use the cut-sheet feeder, the paper does not feed
properly.
When you send data, the platen rotates but paper does not feed.
l
Make sure the cut-sheet feeder is correctly installed on the
printer.
See that the paper-release lever is pushed back to the single-
sheet position.
Check for a paper jam near the print head.
See if too many sheets are loaded in the cut-sheet feeder's bin.
If there is only one sheet left in the bin, add more paper.
Two or more sheets feed at the same time.
l
If you have loaded too many sheets in the cut-sheet feeder's
bin, remove some of the sheets.
You may have forgotten to fan the stack of paper before
loading it into the bin. Remove the paper and fan it.
The paper feed is crooked.
l
The paper may be old or creased. Use only new, clean sheets of
paper.
If there is too much paper in the stacker, remove some.
Make sure your paper is the proper size and quality.
Troubleshooting 6-11