Epson FX-870 User Manual page 94

Cut-Sheet Feeders
Switching to the cut-sheet feeder
1. If any printed sheets remain in the printer, press the
button to advance the continuous paper to the tear-off position.
2. Tear off the printed pages.
3. While holding down the
printer feeds the continuous paper backward to the paper-park
position. The paper is still attached to the push tractor but is no
longer in the paper path.
0
CAUTION: Never feed labels backward. Labels can easily
come off their backing and jam the printer. See the
l
instructions below.
4. Place the paper-release lever in the single-sheet position.
If you are printing labels, follow these instructions to remove the
label supply and switch to the cut-sheet feeder:
1. Tear off the fresh supply at a perforation below the push-tractor.
2. Hold down the
The labels are no longer attached to the push-tractor.
3. Place the paper-release lever in the single-sheet position.
4-12 Using the Printer Options
ALT
button, press the
PAPER FEED
button to eject the remaining labels.
TEAR OFF
EJECT
button. The