Changing Group 1 Default Settings - Epson FX-870 User Manual

Changing Group 1 default settings

1. Make sure the printer is turned off.
2. Turn on the printer while you hold down the
enters the Group 1 default setting mode. The printer beeps once.
3. Load single-sheet or continuous paper. The printer then
automatically loads the paper and prints a quick reference.
Group default settings
1
BLINK ON
BLINK BLINK
Tear off
Auto line feed
Default-Setting Mode
FONT
Valid
Invalid
Depends on interface
Valid
Using the Printer
button. This
OFF
ON
OFF
ON
3-9