3.
PAUSE/TEAR OFF
Press the
PAPER FEED
press the
indicated by the arrows beside the buttons.
4. To leave the micro-feed mode, press the
Then press the
Adjusting the loading position
The loading position is the position of the paper after it is
automatically loaded by the printer. If your printing is too high or
low on the page, you can change the loading position.
1. Make sure the printer is turned on.
2. Load either continuous or single-sheet paper. (Load continuous
paper by pressing the
3. While holding down the
enter the micro-feed mode. The
blink alternately.
PAUSE/TEAR OFF
4.
Press the
PAPER FEED
press the
indicated by the arrows beside the buttons.
3-16
Using the Printer
button to feed the paper forward or
button to feed the paper backward, as
PAUSE
button to continue printing.
PAPER FEED
ALT
button, press the
FONT
button to feed the paper forward or
button to feed the paper backward, as
ALT
button again.
button.)
PAUSE
CONDENSED
and
Micro-Feed
button to
lights