Epson EPL-6000 User Manual page 74

COPIES = 01*
You can change the setting to print between one and 99 copies of
each page.
AUTO CONT = ON*
When this option (automatic continue) is on, your laser printer
automatically continues printing after a 10 second pause when one
of the following errors occurs: paper size, error 20 (memory
overflow), error 21 (page too complex), error 22 (communication
error), and error 40 (parity/baud rate error). When this option is off,
you must press the RESET/CONTINUE button to continue printing. See
Chapter 7 for details on error messages.
EMULATION = HPLJ2*
This option allows you to enter the HP emulation submenu
(described in the following section). When an optional Epson FX
Identity Cartridge is installed, the printer also shows FX as an
option. (The SelecType options for the FX cartridge are described in
the option manual.)
I/F = PARALLEL*
This option selects the printer interface. When the serial interface is
set, this option is used to enter the interface submenu (described
later).
01 through 99
ON*
OFF
HPLJ2*
PARALLEL*
SERIAL
Using the Printer
SelecType Options
3-21