Epson EPL-6000 User Manual page 159

Error Messages
ERROR 22
The buffer has overflowed due to a communication protocol error.
Make sure that your SelecType settings match the communication
protocol settings of your computer. If the problem persists, contact
your authorized Epson dealer for service.
ERROR 40
A parity or baud rate error has occurred. Press the RESET/CONTINUE
button to clear the error. Make sure your SelecType settings match
your computer configuration. If the problem persists, contact your
authorized Epson dealer for service.
FONT CART ERROR
The font cartridge selected using the FONT SOURCE SelecType
option is not installed properly. Turn the power off. Then remove
the cartridge and reinsert it. Turn the power back on and resend the
print job. If the problem persists, make sure that the correct FONT
SOURCE option has been selected in SelecType. See the section on
SelecType in Chapter 3 for details.
INSERTION ERROR
There is a paper feeding problem. See the section on paper jams in
this chapter for details.
PAPER EMPTY
There is no paper in the paper cassette or the paper cassette is not
installed properly. Load more paper into the paper cassette or
properly install the cassette. See Chapter 4 for details.
PAPER JAN
Paper is jammed inside the printer. See the section on paper jams in
this chapter.
7-4
Troubleshooting