Epson EPL-6000 User Manual page 170

Problem
The
ON LINE
message appears but
nothing is printed
(continued).
The test prints do not
print
The printer stops
printing and the
display reads
CHANGE DRUM,
TONER EMPTY, or
PAPER EMPTY.
Solution
Your software may not be installed
properly for your printer. Make sure the
currently selected printer mode matches
your program's printer driver.
The printer must be set off line when
running a test print.
You may have installed an incompatible
font cartridge. Try the test print again
without the cartridge installed, or with a
different cartridge.
If the problem continues, service by an
authorized Epson dealer is needed.
Replace the component specified. See
Chapter 4 for paper loading instructions.
See Chapter 6 for toner and drum
replacement instructions.
Printing Problems
Troubleshooting 7-15