Epson EPL-6000 User Manual page 68

3. Press the SET button again to set the emulation.
4.
Press the SET button a third time to enter the emulation
submenu, where you can change options for the following
functions:
FONT SOURCE
FONT NUMBER
FORM
SYMBOL
5.
Use the
change.
Note: This submenu does not work in a loop. Pressing the
button when FONT SOURCE is displayed or the
when SYMBOL is displayed causes you to exit the emulation
submenu and return to the main menu.
6. Press the SET button to activate the option. The function stops
blinking, and the option starts blinking.
7.
Use the
8. Press the SET button. An asterisk (*) appears next to the option,
indicating that the new option has been set. The option stops
blinking; the function starts blinking.
9.
To exit the emulation submenu and return to the main menu,
use the
message EMULATION = HPLJ2* appears in the display.
If you wish to exit SelecType at this point, see the section on
exiting SelecType later in this chapter.
or button to move to a function you want to
button to move to the option you want to set.
or
button to take you back to the main menu. The
or
Using SelecType
button
Using the Printer
3-15