Epson EPL-6000 User Manual page 160

Note: If-the printer was recently transported, the paper feed
mechanism may need to be aligned. See the section on setting the
paper feed mechanism in Chapter
PAPER SIZE ERROR
If you press the ON LINE button to override the PS CHANGE
message, this message appears as your print job ejects to remind
you to change the paper and SelecType PAPER SIZE option. See
PS CHANGE below.
PS CHANGE
Your application software has requested a paper size that does not
match your SelecType setting or paper. Press the RESET/CONTINUE
button to clear the error; the printer is set off line.
Note: If you are using a non-standard paper size (one that is not
listed on the PAPER SIZE menu in the SelecType), manual
feeding may be necessary. See Chapter 4 for details.
After clearing the error, you have two options:
1. Change the paper in the cassette; then enter SelecType and
change the paper size to match. Press the ON LINE button after
exiting SelecType to continue printing.
2. Alternatively, press the ON LINE button to continue printing on
the current paper. (The message PAPER SIZE ERROR appears
in the display.) See PAPER SIZE ERROR above.
for details.
1
Troubleshooting 7-5
Error Messages