Epson EPL-6000 User Manual page 64

Use of these buttons is described in more detail in the following
sections.
RESET/CONTINUE
CAUTION: This initializing procedure returns all
SelecType options to their factory settings, cancelling all
changes you have made. It should be used with care.
SET
This button has several uses related to
SelecType. (For information on other uses
of this button, see the section on buttons
earlier in this chapter.)
Implementing SelecType changes - After
you exit SelecType (with the printer off
line), hold down this button for three
seconds (until the message RESET
appears) to implement your SelecType
settings.
Initializing SelecType settings to factory
defaults - In SelecType mode, hold down
the RESET/CONTINUE button for three
seconds (until the message INITIALIZE
appears). Then hold down the button for
three more seconds (until the message
RESET appears) to return all SelecType
functions to the factory settings. See the
section on initializing SelecType for full
details.
Use the SET button to select and set
SelecType options.
The SelecType
Using the Printer
Control
Panel
3-11