Epson EPL-6000 User Manual page 52

The DIP switches are located at the back of your printer and are
numbered 1 through 8.
The DIP switch settings are listed below. Use the tip of a ballpoint
pen or another small pointed object to turn the switches ON or OFF.
Pressing a switch down sets it ON and up sets it OFF.
CAUTION: Turn your printer off before setting the
switches. Then turn it back on to implement your changes.
1
RS-232C OFF
RS-422A
OFF
* If DIP switch 5 is turned ON when the RS-232C serial interface is in use, pin 25
on the connector is set to +5V; if the DIP switch is turned OFF, the pin on the
connector is not used.
3 4
2
OFF OFF OFF
OFF OFF OFF
Testing and Connecting Your Printer
Connecting to Your Computer
5 6 7
OFF OFF
l
OFF ON ON
6
ON
OFF
2-15