Omron E5 J Series Manual page 4

Fuzzy self-tuning temperature controller with advanced pid (2 pid) contr
Table of Contents

Advertisement

E5 J
Characteristics
Indication accuracy (see note 1)
Hysteresis
Proportional band
Integral (reset) time
Derivative (rate) time
Alarm output setting range
Control period
Sampling period
Output refresh time
Display refresh time
Insulation resistance (see note 2)
Dielectric strength
Vibration resistance
Shock resistance
Life expectancy
Ambient temperature
Ambient humidity
Memory protection
Enclosure ratings
Weight
EMC
Approved standards
Note: 1. The indication accuracy of the K, T, and N thermocouples at a temperature of –100 C or less is 2 C 1 digit maximum. The indica-
tion accuracy of the U thermocouple at any temperature is 2 C 1 digit maximum.
2. The insulation resistance was measured with a Control Output Unit attached.
3. The model numbers of the exclusive watertight covers conforming to IP66, NEMA4 are as follows:
For E5AJ: Y92A-96N; For E5BJ: Y92A-72N; For E5CJ: Y92A-48N; For E5EJ: Y92A-49N
4. Basic insulation is between the input and output.
4
( 0.5% of indication value or 1 C, whichever greater) 1 digit max.
0.1 to 999.9 C/ F (in units of 0.1 C/ F) (during ON/OFF control action)
0.1 to 999.9 C/ F (in units of 0.1 C/ F)
0 to 3,999 s (in units of 1 s)
0 to 3,999 s (in units of 1 s)
Thermocouple (K/J/L/N): –1,999 to 9,999 C/ F (in units of 1 C/ F)
Platinum resistance thermometer, thermocouple (T/U): –199.9 to 999.9 C/ F
(in units of 0.1 C/ F)
Pulse output: 1 to 99 s (in units of 1 s)
500 ms
500 ms
500 ms
20 MΩ min. (at 500 VDC)
2,000 VAC, 50/60 Hz for 1 min between terminals of different polarities
Malfunction:
10 to 55 Hz, 9.8 m/s
Destruction:
10 to 55 Hz, 19.6 m/s
2
Malfunction:
196 m/s
(20G), 3 times each in 6 directions
2
(98 m/s
(10G) applied to the relay)
2
Destruction:
294 m/s
(30G), 3 times each in 6 directions
Mechanical:
10,000,000 operations (relay alarm output)
Electrical:
100,000 operations (relay alarm output)
Operating:
–10 C to 55 C (with no icing)
Storage:
–25 C to 65 C (with no icing)
Operating: 35% to 85%
Non-volatile memory (number of write operations: 100,000)
Front panel:
E5AJ/E5EJ/E5BJ: IEC standard IP54
E5CJ: IEC standard IP50 (see note 3)
Rear case:
IEC standard IP20
Terminals:
IEC standard IP00
E5AJ: Approx. 360 g, E5EJ: Approx. 280 g, E5BJ: Approx. 240 g, E5CJ: Approx. 170 g;
Mounting adapter for E5CJ: approx. 10 g;
Mounting bracket for E5AJ, E5BJ, and E5EJ: Approx. 65 g
Emission Enclosure:
Emission AC Mains:
Immunity ESD:
Immunity RF-interference:
Immunity Conducted Disturbance:
Immunity Burst:
UL1092, CSA C22.2 No. 142
Conforms to EN50081-2, EN50082-2, EN61010-1 (IEC1010-1) (see note 4)
Conforms to VDE0106/part 100 (Finger Protection), when the separately-ordered terminal
cover is mounted.
2
(1G) for 10 min each in X, Y, and Z directions
2
(2G) for 2 hrs each in X, Y, and Z directions
EN55011 Group 1 class A
EN55011 Group 1 class A
EN61000-4-2: 4-kV contact discharge (level 2)
8-kV air discharge (level 3)
ENV50140:
10 V/m (amplitude modulated,
80 MHz to 1 GHz) (level 3)
10 V/m (pulse modulated, 900 MHz)
ENV50141:
10 V (0.15 to 80 MHz) (level 3)
EN61000-4-4: 2-kV power-line (level 3)
2-kV I/O signal-line (level 4)
E5 J

Advertisement

Table of Contents
loading

Table of Contents